The following sections list the various services used by Prism and the settings available for those settings. Most of the services can be configured either by directly editing the service's .ini file or by editing the service's configuration in Tech Toolkit Service Manager. Most of the .ini files for the services are in the \ProgramData\RetailPro\Server\Conf folder. A few of the services listed here cannot be edited.
When changes to config settings take effect:
1. All config settings for Prism services that do not pertain to Log settings, require a service restart to take effect, except as noted in 2.
2. Config changes for PrismScheduling and PrismTechToolkit services, other than thread counts, timeouts, and reconnect delay, take effect within 60 seconds of making the change.
3. Edits to log config settings take effect immediately, without a service restart, with the exception of "Alternate Log Folder". Log folder changes require a restart of all "Retail Pro Prism" services to take effect.
List of Prism Services:
|OracleServiceRProODS||This service facilitates the replication of data between Prism and the RIL Oracle database. This service will establish the connection with the OracleODS12cr1TNSListener so that the Prism and Oracle databases can communicate. This service runs as a dependency of the PrismMQ service.|
|Apache||Every application that sends data across the Internet requires a web server to make the HTTP/S calls. To use Prism, the Apache service must be running. You can verify whether the service is running by launching Apache Monitor from the taskbar. When making configuration changes, if you need to reboot the service, be sure to stop the service, wait for it to shut down, then use the Start button to restart the service. Do not use the Restart button to restart the Apache service.|
|RabbitMQ||The RabbitMQ service handles tasks related to RabbitMQ messaging and messagequeues|
|PrismBackOffice||PrismBackOffice.exe facilitates operations related to inventory, adjustments, physical inventory and other back-office tasks. You can make api calls via the api/backoffice path|
|PrismCommonService||The PrismCommon service is an 'Auxiliary' service, a service that is used by many modules/functions throughout Prism.|
This service handles POS-related tasks, Physical Inventory and a few other inventory-related tasks. The POSv1Service handles the RPC Methods and REST Resources that are listed in the RPSRESTSERVICEMODULE area of the Prism API Explorer. This service has settings related to thread counts and timeouts. The purpose of these entries is to control how much memory is allocated to a given RPS instance. Since we have a 32 bit architecture, each instance is limited to a max of 2 GB of memory. Transform is a very heavy resource and has a defined limit that we feel should be adequate for most circumstances. Auth threads are only applicable to the primary instance and define how many auth requests can happen simultaneously
|PrismResiliencyService||This service facilitates the continued operation of central credit and central gift cards when the connection to the Centrals server goes down. The PrismResiliencyServer.exe facilitates offline processing and sending of those offline transactions to the processor when the connection is restored.|
|PrismLicSvr||Although licensing is not yet implemented in Prism, the PrismLicSvr service must be running for Prism to run. You will receive an error message when trying to launch Prism if this service is not running.|
This service plays an important role in the replication of data between servers. You can configure PrismMQ with various options, including max number of senders/receivers and compression thresholds.
|PrismSchedulingService||The Scheduling Service facilitates the running of tasks that you have defined in Tech Toolkit, as well as Prism built-in tasks (e.g. building customer history and subsidiary modeling). At the scheduled time, the service makes the necessary API calls to run the task(s). Tsks handled by the PrismSchedulingService include:
Customer History daily process
Customer History initialization process
Scheduling service housekeeping task (1x per day)
|PrismTechToolkitService||The TechToolKit Service supports the web-based version of Prism TechToolKit.|
|PrismReplicationService||The PrismMQService.exe works in conjuction with PrismMQConsumer.exe and PrismMQProducer.exe to replicate data between Prism servers..|
Note: This service is found in C:\Program Files (x86)\erl9.3\erts-9.3\bin\erlsrv.exe
This service cannot be configured; however, you can start/stop the service as needed.
PrismBackOffice.exe facilitates operations related to inventory, purchasing, transfers and other back-office tasks. You can make api calls via the api/backoffice path. The GETLIMIT section enables you to restrict the total number of records returned by a GET request for the following: in.ventorylist, transferslip, invnlot, inventory, document, adjustment and invnserial.
This service helps with tasks that are performed in multiple areas (e.g. customer lookups).
The GETLIMIT section restricts the total number of records returned by a GET request for customer and customerlist records (default = 100).
This service handles POS-related tasks, Physical Inventory and a few other inventory-related tasks. The POSv1Service handles the RPC Methods and REST Resources that are listed in the RPSRESTSERVICEMODULE area of the Prism API Explorer. This service has settings related to thread counts and timeouts. The purpose of these entries is to control how much memory is allocated to a given RPS instance. Each instance is limited to a max of 2 GB of memory. Transform is a very heavy resource and has a defined limit that we feel should be adequate for most circumstances. Auth threads are only applicable to the primary instance and define how many auth requests can happen simultaneously.
The PrismResiliencyService enables retailers to continue to make central credit and central gift card transactions when the connection to the Centrals server goes down. The PrismResiliencyServer.exe facilitates offline processing and sending of those offline transactions to the processor when the connection is restored.Settings for resiliency service. Note that the database type and location are taken from RPSLicensing.ini file.
|DBRETRYSECONDS||The number of seconds between checks to see if the connection to the Centrals server has been restored. Default = 10 seconds. This means that if the connection to the Centrals Server is lost, the PrismResiliencyService.exe will wait 10 seconds and then check if the Centrals server is available. If not available, the PrismResiliencyService.exe will wait another 10 seconds and then check again if the Centrals Server is available, etc.|
|DATABASECONNECTDELAY||Number of seconds to wait before trying to connect to database (to prevent crashing Oracle during startup). Default = 30.|
|UDPPORTIN||Keep default 8432 Incoming port number for receiving commands. Used for centrals resiliency|
|UDPPORTOUT||Keep default 8433 Outgoing port number for sending responses to commands. Used for centrals resiliency|
Although licensing is not yet implemented in Prism, the PrismLicSvr service must be running for Prism to run. You will receive an error message when trying to launch Prism if this service is not running.
Prism Scheduling Service
This service coordinates running of the following predefined tasks: Customer History daily process, Customer History initialization process, Markdown processing, Subsidiary Modeling and Scheduling service housekeeping task (1x per day)
|RUN TASKS ENABLED||If True, scheduled tasks are run.
If False, no scheduled tasks will be run.
|MAXALLOWEDTASKS||Determines the maximum number of tasks that can be chained together to run at one time.|
|RPSPASSWORD||Encrypted password||N/A||Password for the specified username|
This service monitors system settings and services. You can view or edit the settings for the TechToolkit service in the Service Manager tool of Tech Toolkit, or by editing the PrismTechToolkit.ini file (located in …\ProgramData\RetailPro\Server\Conf folder).
|System Monitor Enabled||The System Monitor, when enabled, checks available diskspace, memory, and other system attributes. Default = Disabled|
|HealthCheck Run Interval (seconds)||The service will check Prism services' status every 60 seconds and restart any Prism-related services that have stopped or are not running. Enter the number of seconds between each health check. Default = 60.|
|Service Monitor Service Exclusions||If there is a Prism service you do not want the Monitor to restart, enter its exact name (as shown in the ToolKit's Service Manager listing) in the "Service Monitor-Service Exclusions" edit box. By default, all services are monitored.|
|Service Monitor Restart All Services||If selected, all services are restarted automatically during a full Prism restart. Default = Enabled|
|Service Monitor Enabled||The Service Monitor, when enabled, checks Prism services' status every 60 seconds and restarts any Prism-related service that has stopped or did not start. Default = Disabled|
|Thread Count||Number of threads used for monitoring services.|
|Available Diskspace Alert Percent||When available disk space reaches the specified percentage, an alert is sent. Default = 10. Important: The alert is not displayed to the end user; the alert is written to TechToolkitService log file.|
The PrismMQService has key settings related to data replication. See the PrismMQService topic for details.